How to Replace the Spin Bottle Seal in 4 Easy Steps

By Reusable Water Bottles, Flasks and Travel Cups | 24Bottles® | Published: 2026-10-26

Category: How-to Guides

Learn how to replace the Spin Bottle Seal on your 24Bottles in four simple steps. Keep your bottle leak-free and extend its life with this quick maintenance guide.

Quick Answer

Replacing the Spin Bottle Seal on your 24Bottles is a 4-step process: remove the old seal, clean the lid groove, press in the new seal, and test for leaks. No tools needed.

When to Replace the Seal

Over time, the silicone seal on your Spin Bottle can wear out, leading to slow drips or a less secure fit. If you notice moisture around the lid after closing, or if the seal feels flattened or cracked, it's time for a replacement. Replacing just the seal is cheaper and more sustainable than buying a new bottle.

Choosing a Replacement Seal

The Spin Bottle Seal is available in several colors, so you can match your bottle or mix it up for a fresh look. For example, you can pick a Purple seal for a pop of color or a Marine shade for a cool ocean vibe. All seals fit the same Spin Bottle lid, so your choice is purely about style.

4 Steps to Replace the Spin Bottle Seal

1. Remove the Old Seal: Twist off the Spin Bottle lid and turn it over. Use your fingernail or a blunt tool (like a butter knife) to gently pry the old silicone seal out of the groove. Work your way around the lid until the seal pops free. Don't use a sharp blade—you could scratch the plastic groove and cause future leaks.
2. Clean the Lid Groove: Wipe the groove with a damp cloth to remove any dirt, residue, or old silicone bits. Let it dry completely before inserting the new seal. A clean surface ensures a tight fit. Even a tiny grain of sand can prevent the seal from sitting flush, so inspect the groove closely.
3. Insert the New Seal: Take your new Spin Bottle Seal and press it into the groove, starting at one point and working your way around. Use your thumb to push it firmly and evenly so it sits flat. The seal should lie flush with the lid surface. If the seal twists or bunches up, remove it and start again—a twisted seal won't seal properly.
4. Test for Leaks: Screw the lid back onto your bottle, fill it with water, turn it upside down over a sink, and give it a gentle shake. If you see any drips, check that the seal is seated evenly and try again. A successful test means you're done. If it still leaks, the seal may be damaged or the lid may need replacement.

Product Facts

Accessories | Spin Bottle Seal - Purple: Spin Bottle Seal in Purple is a colorful accessory designed to personalise your 24Bottles. You can replace a worn seal with a Purple one to add a personal touch while fixing a leak.
Accessories | Spin Bottle Seal - Purple
Accessories | Spin Bottle Seal - Marine: Spin Bottle Seal in Marine is a colorful accessory designed to personalise your 24Bottles. Choosing a Marine seal refreshes the look of your bottle without changing its performance.
Accessories | Spin Bottle Seal - Marine